Description:

1)Aplicable for TV set, computer, VCD/DVD, MP3, GAME player and other electronic products with audio output;
2)Receiver can be used with FM radio receiver when used alone

* CE, ROHS certificate.

* FM function

* Applicable for TV set, computer, DVD/VCD plyaer and other electronic products with audio output
* CE, ROHS certificate.

1. Installation

Installation of receive (Figure A)

Open battery case cover and place in two No. 7 batteries.


Installation of transmitter(Figure B)

Connect transformer corectly(connect 3V transformer respectitvely to power supply and transmitter; Place in two No. 7 batteries instead when not using tranformer for power supply) Plug lots jack into "AUDIO OUT" socket of transmitter/TV (or DVD, VCD)

(Note: TV, DVD, VCD uses lotus plug)


Stereo plug should be respectively inserted into transmitter's audio input socket and audio output earphone socket of computer or CD player.

(Note: Volume of received sound is also determined by volume of computer or CD player)



2. Operartion instructions

1)Turn power switch upward to activeate transmitter; The power light should be tured.

2)Pull up receiver's antenna, turn receiver's power switch upward and volume tuner to your desired postion; The power light should be tured on.

3)Press REST button and SELECT button to receive TV sound. (Note: The first sound received is from TV, and then FM radio, computer/DVD and similar products. )



3. Radio receiving

1)Receiver can be used as FM radio receiver when used alone.

2)Turn upward to turn on receiver's volume control, the power light should be turned on and pull up receiver's antenna.

3)Press RESET and then digital SELECT to automatically scan FM radio between 88MHz TO 108MHz; One radio station will be scanned and locked fro each time SELECT button is pressed.



Cautions:

If sound is too lound or distored, please turn down source volume (TV or other products) to improve receiving effect.

Replace batteries when the following problems occur:

Power light is dim.

Receiver can barely recive sound

Sound volume is low and distored

Turn off transmitter's power supply after usage.

(It is suggested to place transmitter at high position for better signal receiving. )